[ Home : Programs | libCVD | Hardware hacks | Publications | Teaching | TooN | Research ]

The new guide of the conversation in Autoconf and Make

This is now hosted on github and that version may well be more up to date. If for any reason you want the historic version, it's here.

A brief introduction to Autoconf (2nd edition)

Preface

A long time ago I autoconf-ized the build system for libCVD. It was one of the best decisions I made with that library. It took me a while because there wasn't a good “getting started” guide, so I wrote one. It's been the top link for “autoconf tutorial” on google for a while.

Don't go there.

The trouble is I wrote it after my first Autoconf project back in 2005 or so. I've learned how to use it better since then and it's also moved on. It'll get you started, but probably teach you bad habits. I've also since come to the conclusion that while autoconf is entirely separate from make and can be used without it, it makes much more sense to have examples with makefiles because they are almost always used together.

Introduction

Autoconf is a system for generating a script which will automatically determine the presence of things which your project either depends upon, or can make use of. Once these have been determined, autoconf can export this information in various formats suitable for your project to use. Autoconf scripts themselves are written in a combination of shell and M4 (a macro processing language considerably more capable than the C preprocessor). Autoconf essentially runs the preprocessor on your script to produce a portable shell script which will perform all the requisite tests, produce handy log files, preprocess template files, for example to generate Makefile from Makefile.in and and take a standard set of command line arguments.

There are several tools in the suite, including automake (for automatically generating makefiles) and autoscan (for scanning source trees to make configure scripts). I'm not going to cover them. However, while autoconf has nothing to do with Make, by far the most common use of it is to generate a Makefile. I only use GNU Make, and so the examples may well use GNU Make only features.

In order to read this tutorial, a knowledge of shell scripting is assumed, but not essential for the basic examples. No knowledge of M4 is needed, but it worth knowing especially if you want to write your own custom tests which you wish to reuse.

Hello, World.

Grab the code in example 1, or put this in configure.ac:

AC_INIT(myconfig, version-0.1)
AC_MSG_NOTICE([Hello, world.])

Now compile it and run it

autoconf
./configure

And you get:

ex_01 $./configure 
configure: Hello, world.
ex_01 $

Alriiight! :)

Now that that's out of the way, there's a few basic things. * All public Autoconf M4 macros look like A[CST]_??????. There may be private versions starting with _, but it's generally a bad idea to use them. * M4 arguments are quoted with [ and ]. There is NO WAY to escape these, however, you have several options if you wish to insert ['s or ]'s: 1. Use a ‘Quadrigaph’. @<:@ gives you [ and @>:@ gives you ]. Those look as nasty as they sound. 2. Balance your quotes. M4 will turn [[]] in to []. Beware of using this in arguments to macros. Sometimes, you need to double quote as well ([[[]]]). This is not as nasty as it sounds, it's much, much nastier. M4 programming is quite fun in that you have such a huge of acievement when the quotes finally work correctly. 3. Change the quoting using: to change the quoting to and . The autoconf documentation (rightly, in my opinion) warns against the (over) use of this, since it can lead to unexpected results. This is also as nasty... see the pattern here? 4. Avoid [ and ] whereever possible. As a result, you can't easily use the shell command [ to perform tests. You have to use test instead. * If you make bad shell code, the errors probably won't appear until you run the configure script. * Configure scripts are almost always called configure.ac * Bear in mind that this is a tutorial. Many macros provide optional arguments which allow you to change the way of doing things. There may be many more ways of solving a problem than I've covered here.

A basic project

Since the purpose of autoconf is compiling projects, it makes most sense to start with a simple project. The project as it stands just has a Makefile. Go in to ex_02 and do:

make
./program

If all goes well and you have a C++ compiler installed, then you should get:

Hello, I am a program

It's now going to be autoconfized. First, we rename Makefile to Makefile.in and edit it look like this:

CXX=@CXX@
LD=@CXX@
CXXFLAGS=@CXXFLAGS@

program: program.o
    $(LD) -o $@ $^

.PHONY: clean
clean:
    rm -f program *.o

It's more or less the same, but instead of hard-wiring the compiler names and flags and so on, we put in placeholders that the configure script will substitute. All the placeholders are of the form @foo@. I've also added a "make clean" rule.

We now need a matching configure script:

AC_INIT(program, 1.0)

dnl Switch to a C++ compiler, and check if it works.
AC_LANG(C++)
AC_PROG_CXX

dnl Process Makefile.in to create Makefile
AC_OUTPUT(Makefile)

By the way, dnl in autoconf is a comment. That's because of M4 and M4 is... best not to go there right now.

Now, compile the configure script by typing "autoconf" and you're ready to perform the standard build incantation:

./configure &&  make

I get the output:

checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
configure: creating ./config.status
config.status: creating Makefile
g++ -g -O2   -c -o program.o program.cc
g++ -o program program.o

That's basically it. You now have a fully armed and operational configure script. Because autoconf is a decent system, it already comes with all the different features. You can, for example change the compiler flags:

make clean
./configure CXXFLAGS="-Wall -Wextra" && make

or, you can change the compiler if you like:

make clean
./configure CXX=g++-5 && make 

Naturally that will fail if you don't have that compiler. You can even cross compile! First, install the AVR toolchain if you can, then run:

./configure --host avr && make

You should get the output:

checking for avr-g++... avr-g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether avr-g++ accepts -g... yes
configure: creating ./config.status
config.status: creating Makefile
avr-g++ -g -O2   -c -o program.o program.cc
program.cc:1:20: fatal error: iostream: No such file or directory
 #include <iostream>
                    ^
compilation terminated.
make: *** [program.o] Error 1

Wait, what?

The AVR is a “non hosted” platform in that it has no OS. That means that you can't expect obvious bits of the C++ standard library to be there. While this is an obscure case, it does illustrate the next topic very nicely which is:

Performing basic tests

So first we need some tests to perform. The iostream example is a little contrived, so I'll bring in a really common library, zlib. The new program example 5 now outputs its data gzip compressed.

First, we need to modify the Makefile.in to use the library flags. First, we add the template substitutions:

LDFLAGS=@LDFLAGS@
LIBS=@LIBS@

then we change the build line to use them:

program: program.o
        $(LD) -o $@ $^ $(LDFLAGS) $(LIBS)

At this point you might wonder, “Why not save typing and just use @LIBS@ everywhere?”. It's a good question. The answer is that you can, but if you ever end up debugging things and you want to make a quick, temporary change by editing the generated Makefile, you will curse yourself because instead of changing things in one place, you have to change it everywhere.

So, now, put the following lines in the configure.ac file:

AC_CHECK_HEADERS(zlib.h)
AC_SEARCH_LIBS(deflate, z)

The first function compiles a minimal program against each of the specified headers (you can give more than one), and the second checks for the function "deflate" in any one of the listed libraries. If you were to run the configure script, you'd get something like this in the output:

checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking for library containing deflate... -lz

That's pretty good, and you can now build the program, however, if the test fails then the configure script will continue and give you a makefile which would fail to build your program.

So now what?

At this point you need to do something with the results of the test. What you want to do, and how you want to do it depend strongly on what you're trying to achieve. The simplest case is a hard dependency, where failure to find the library prevents the configure script from completing.

Both the functions above set various variables on success, in this case:

ac_cv_header_zlib_h=yes
ac_cv_search_deflate=-lz

You can look in config.log, that has a list of everything which is defined. You can perform tests with shell logic on those if you like. However, those functions also provide two optional arguments: action on success and action on failure.

Probably the easiest solution is to do this:

AC_CHECK_HEADERS(zlib.h, [], [AC_ERROR([A working zlib is required])])
AC_SEARCH_LIBS(deflate, z, [], [AC_ERROR([A working zlib is required])])

Now try misspelling “deflate” and rerunning autoconf and configure. You'll see it fail like this:

checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking for library containing deflte... no
configure: error: A working zlib is required

What's going on under the hood?

I find many tools and systems easier to understand if I know what's going on under the hood. I think it makes predicting the behaviour and debugging substantially easier. Fortunately, autoconf is fairly straightforward in that regard.

Autoconf is essentially a compiler that compiles the configure.ac script into a shell script which can then run on any platform without autoconf being present. Well, I say compiler... It's actually all in a language called M4. M4 is a macro processing system, like the C preprocessor on steroids (and PCP). When you run autoconf, it defines a whole bunch of M4 macros and then runs your script through the M4 preprocessor. The macros all get expanded (they all contain shell code) and out comes pure shell code with no trace of the M4 or autoconf languages left behind.

The macros are in all caps, and everything else is passed through as-is with no modification. That's why you can write logic in shell code too: it just ends up in the configure script.

Most of the tests in autoconf are to do with compiled code. To do these, autoconf emits small programs to a file, then runs that file through the compiler and possibly linker, and checks the resulting error codes. For example:

AC_CHECK_LIB(m, cos)

Will generate a program looking something like this:

char cos (); 
int main ()
{   
    cos ();
    return 0;
}

Then attempt to compile and link it with libm. Autoconf does similar things for AC_CHECK_HEADERS, but only runs the compiler, not the linker too. If you want to see more details, then create a test which you know will fail, run the script and and look in config.log. It only stores the program fragments from tests that fail.

More advanced test results

Sometimes, dependencies are optional. There are of course an infinite number of ways of dealing with those. The two common ones are via conditional compilation (i.e. setting macros) or via choosing between different source files. I strongly prefer the latter if possible.

Now, the tests so far will set things which can be used (like the presence or absence of -lz in the library flags), but they are independent. You want to enable the dependency if and only if all relavent tests pass. I find the easiest way of doing that is using a construct like this:

a=0
AC_CHECK_HEADERS(zlib.h, [], [a=1])
AC_SEARCH_LIBS(deflate, z, [], [a=1])

if test $a == 0
then
    dnl Thing to do if the library is present
    ;
else
    dnl Thing to do if the library is present
    ;
fi

I'm now going to make zlib an optional dependency.

Compiling alternate files

The first thing to do is to provide two alternatives, one for zlib and one without. Obviously in this case the example is a little contrived but we want to compile hello_libz.cc if we find zlib and hello_no_libz.cc if we don't. Either way, main() is the same, and just calls the hello() function.

Now, alter Makefile.in so it can use another parameter that we get from configure:

objs=@objs@

program: program.o $(objs)
    $(LD) -o $@ $^ $(LDFLAGS) $(LIBS)

And alter configure.ac so it populates @objs@ with either one object file or another.

dnl List of object files as determined by autoconf
object_files=""

a=0
AC_CHECK_HEADERS(zlib.h, [], [a=1])
AC_SEARCH_LIBS(deflate, z, [], [a=1])

if test $a == 0
then
    object_files="$object_files hello_libz.o"
else
    object_files="$object_files hello_no_libz.o"
fi

dnl Make AC_OUTPUT substitute the contents of $object_files for @objs@
AC_SUBST(objs, ["$object_files"])

Now configure will choose between one of the two source files to compile and link, depending on the result of the test. The complete program will work either way.

Conditional compilation

The other main way of having autoconf affect the build is via conditional compilation. You could export -D definitions to the CXXFLAGS or a custom variable. That's a bad idea because your program will have a dependency on the arguments, and make doesn't track or examine those dependencies. The standard way is to generate a config.h file instead. The process is similar to, but not identical to creating a makefile. The relevant part of configure.ac is:

a=0
AC_CHECK_HEADERS(zlib.h, [], [a=1])
AC_SEARCH_LIBS(deflate, z, [], [a=1])

if test $a == 0
then
    AC_DEFINE(HAVE_LIBZ)
fi

AC_CONFIG_HEADERS(config.h)

AC_DEFINE will cause a #define to be written in config.h. IMPORTANT: AC_CONFIG_HEADERS must come before AC_OUTPUT otherwise it willbe silently ignored. config.h.in is a template of an include file, but substitutions are done on #undef lines, it must contain:

#undef HAVE_LIBZ

If HAVE_LIBZ is exported by configure, then that line is commented out. The C++ code can then #include <config.h> and use the macros.

:neckbeard: Ed's Soapbox :neckbeard:

Avoid config.h as much as possible. Disadvantages are:

  1. Every file depending on config.h must be rebuilt if config.h changes even if the change is irrelevant.
  2. Conditional compilation is ugly and can lead to tangled messes of dead code.
  3. It's generally good practice to avoid the preprocessor where possible.
  4. If you're building a library and you've got a config.h included from the public headers, then everything using the library has to be rebuilt if config.h changes.
  5. More source files means better parallel builds.

This isn't a rigid rule. Sometimes the clearest, simplest and most elegant solution to some gnarly cross-platform portability problem involves the preprocessor. In most cases though however, the cleanest portable designs will rely on separating off platform specific parts into different modules and files.

Nicer dependencies with --with and --enable

So if you've made it this far, you probably noticed that debugging and checking the scripts was a bit of a pain, because you had to edit them to make one of the tests fail then rerun autoconf, then put it back again. Autoconf provides two methods of configuration. They are almost identical in function, but the conventions are: * --enable-foo enable feature foo. This is typically used to enable or disable an entire feature, such as --enable-gui. * --with-bar use dependency bar. This is typically used to switch on/off a dependency. That may have an effect on a whole feature. For example --without-gtk might end up disabling the GUI if no other toolkit is available.

If a script understands --with-bar, it will also understand --without-bar which is exactly equivalent to --with-bar=no. That means you can also supply arguments to with. --enable-foo works in the same way. Both styles simply set an environment variable. You can then act on that with the usual shell scripting.

The format is:

AC_ARG_WITH(zlib, [AS_HELP_STRING([--without-zlib], [do not use zlib])])

The first argument is the feature, and it will set $with_zlib to the value specified (blank if the argument is not used). The second argument is the text which appears if ./configure --help is run. AS_HELP_STRING simply makes everything line up and look pretty. Much like the other tests, you can also specify actions for if the commandline argument is present or absent.

This example is very similar to Example 6, except that the relevant part of configure.ac is now:

AC_ARG_WITH(zlib, [AS_HELP_STRING([--without-zlib], [do not use zlib])])

zlib_objs=hello_no_libz.o
if test "$with_zlib" != no
then
    a=0
    AC_CHECK_HEADERS(zlib.h, [], [a=1])
    AC_SEARCH_LIBS(deflate, z, [], [a=1])

    if test $a == 0
    then
        zlib_objs=hello_libz.o
    fi
fi

object_files="$object_files $zlib_objs"

Now, if --without-zlib is specified then it doesn't even try to run the tests, and carries on as if the tests have failed.

Out of tree builds

Out of tree builds are one of those features that are rarely used, but probably ought to be used more. They're kind of handy because with the same source tree, you can build various versions (standard, debugging, cross compiled) from a single source tree, without having to keep multiple copies in sync. It's also so easy to do that you may as well do it.

Autoconf supports it by providing @srcdir@ which tells you the directory of the configure script and of course by extension the source code. That's it as far as autoconf goes, it's completely automatic.

You then need to use the virtual path (vpath) feature of make. Essentially, add the line

VPATH=@srcdir@

to Makefile.in, and now make will more or less overlay VPATH on the current directory when it comes to file lookups.

That's all there is to is. Go into example 9 and run autoconf to create the configure script. Now go into /tmp and type something like:

/path/to/autoconf_tutorial/ex_09/configure && make && ./program | zcat

It should work just as well as if you ran configure and make from within the source directory.

Moving on

At this point you now have a basic, but fully featured autoconf build system. Most of what to do can probably be accomplished with what you've covered so far, however you may come across things which aren't covered.

If you do get into writing your own tests, then it's a very good idea to build off the autoconf macros if at all possible. I know from experience that it's an especially bad idea to write tests that probe the machine you're running the autoconf script from because then you won't be able to deploy the resulting program on a different mahchine (for example if you're cross compiling).

Even without machine specific tests, there are other things you might want to look for or other parts of the build system you might want to probe.

Degugging

There are several levels of debugging which you need to do. There's debugging your shell code (I'm not going to help there), debugging tests in the configure script and debugging the generated files.

If you're debugging autoconf tests, the best place to look is config.log. That stores lots of useful information about tests that fail, including the compiler line with all flags and the bit of code being compiled. It's often quite large, so you'll have to search through it. You can also put your own text in the log to aid that process.

Here's an example:

AC_INIT(myconfig, version-0.1)
AC_PROG_CXX


AC_SEARCH_LIBS(cos, m)

echo "This library check will fail" >&AS_MESSAGE_LOG_FD
AC_SEARCH_LIBS(foo, bar)

AC_MSG_NOTICE([This message will appear in the log and on the screen])
AC_CHECK_HEADERS(foo, bar)

Run the script and look in the log file.

Assuming your configure script runs correctly, the next layer of the stack with bugs is the generated Makefile and config.h if either exist. It would be awfully tedious if you had to re-run configure every time you changed one of those. Fortunately you don't.

Before autoconf completes, it generates a script called config.status, then executes it. This script stores the results of autoconf and does the template substitutions on the .in files. So, if you edit your Makefile.in and run config.status, it'll re-generate the Makefile.

Using other languages

Autoconf supports several languages. The easiest way to switch is:

AC_LANG(Fortran)

which changes the language that tests are run in. There's also a stack of languages so you can push and pop them to make temporary changes.

Other tests

At this point I'm just going to list a selection of what's available. The usage should be reasonably obvious from the names. Quite a few of the marcros have IF_ELSE in the name, which means they just give you places to insert code for success or failure. For quite a lot of common cases, there are more specialised macros to help. Note again, this is a small selection to give a flavour. Since this is a tutorial I can't cover them all, so it's best to browse the manual at this point. * AC_COMPILE_IFELSE --- useful for testing C++ header only libraries * AC_PREPROCESS_IFELSE * AC_LINK_IFELSE * AC_RUN_IFELSE --- this one is tricky. If you're cross compiling, you probably can't run a program you've just compiled, so you need to provide the script with some way of making a decision in that case. * AC_PROG_AWK --- find a working AWK. Versions exist for many of the common tools. * AC_CHECK_TYPES([long long]), AC_TYPE_UINT8_T --- check for various typedefs * AC_OPENMP * Anything starting AC_MSG for generting output that's consistent with the built in tests.

Help! I can't test for C++14 (or something else)

Other people's macros

Autoconf provides good underlying tools, but doesn't provide tests for everything. In many cases, instead of writing your own you can instead grab one already written from the huge official archive of macros. They're also very easy to use precisely because M4 is a macro language.

Here's an example for C++14. First get this extension macro and put it in the m4 subdirectory. Then use it in the following way:

AC_INIT(myconfig, version-0.1)
AC_LANG(C++)
AC_PROG_CXX


m4_include([m4/ax_cxx_compile_stdcxx.m4])
AX_CXX_COMPILE_STDCXX(14)

Now your script will test for C++ 14 and fail if it isn't found. The official extension macros are generally very well tested and so it's better to use those than roll your own.

Writing your own tests

Sooner or later, you'll probably find that there's not a test for something you want to do repeatedly. For example, I like to routinely add flags to do with warnings, GDB symbols and so on. Here's an example of a custom test and its use

dnl TEST_AND_SET_CXXFLAG(flag, [program])
dnl
dnl This attempts to compile a program with a certain compiler flag.
dnl If no program is given, then the minimal C++ program is compiled, and 
dnl this tests just the validity of the compiler flag. 
dnl


dnl Add flags, but only if the flags weren't overridden already
if test "$CXXFLAGS" == "-g -O2"
then
    
    TEST_AND_SET_CXXFLAG(-Wall)
    TEST_AND_SET_CXXFLAG(-Wextra)
    TEST_AND_SET_CXXFLAG(-W)
    TEST_AND_SET_CXXFLAG(-O3)
    TEST_AND_SET_CXXFLAG(-ggdb)
    TEST_AND_SET_CXXFLAG(-fnot-a-valid-flag)
fi

If you run the configure script it will attempt to add a whole bunch of flags to the compiler, but it won't cause errors if any of those flags are invalid.

Making the world a better place

Who doesn't want to make the world a better place?

Have you ever had the following process:

  1. ./confiugure && make && make install
  2. Try running the program to discover some feature you want is missing.
  3. Re configure.
  4. Examine output of autoconf until your eyes bleed.
  5. Finally discover the most likely things which have failed.
  6. Install packages, configure and make.
  7. Discover you were wrong, and repeat 4-6 until you finally get the package working
  8. Then repeat 1-8 until you finally have every feature you care about, or until you simply lose the will to carry on.
  9. Use your new prorgam in a desultory manner.

The good news is there's no need to inflict that on your users. In this example, there's a configure script for a hypothetical library which handles images and video. All dependencies are optional---if it's missing libjpeg, it'll work but just not be able to handle that format for example.

Here's what I do to make my scripts look nice. Firstly, I make pretty section headers in the configure output using a macro like this:




[
    echo >& AS_MESSAGE_FD
    echo '   [Checking for image libraries]   ' | sed -e's/./-/g' >&AS_MESSAGE_FD
    echo '   [Checking for image libraries]' >& AS_MESSAGE_FD
    echo '   [Checking for image libraries]   ' | sed -e's/./-/g' >&AS_MESSAGE_FD
]

Then, I keep track of what possible options there are. First, define a list of all possible options:

all_options="jpeg png tiff funkyimage v4l2 ffmpeg awesomevideo" 

then have another list which is the options which have been found. Whenever, you find something, then append it to the list:

options=
...
options="$options jpeg"

So, a complete test would look like this:

a=0
AC_CHECK_HEADERS(png.h, [], [a=1])
AC_SEARCH_LIBS(png_create_info_struct, png, [], [a=1])
if test $a == 0
then
    options="$options png"
fi

Then at the end of the script, print out both a list of options and list of the missing options. I do that with a little bit of shell scripting:

echo "$options" "$all_options" | tr ' ' '\n' | sort | uniq -u | tr '\n' ' '

The resulting configure script gives an output which I think is much easier to read and to figure out the results of than the usual wall of text:

$ ./configure 
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking how to run the C++ preprocessor... g++ -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking iostream usability... yes
checking iostream presence... yes
checking for iostream... yes

----------------------------------
   Checking for image libraries
----------------------------------
checking jpeglib.h usability... yes
checking jpeglib.h presence... yes
checking for jpeglib.h... yes
checking for library containing jpeg_set_defaults... -ljpeg
checking png.h usability... yes
checking png.h presence... yes
checking for png.h... yes
checking for library containing png_create_info_struct... -lpng
checking tiffio.h usability... yes
checking tiffio.h presence... yes
checking for tiffio.h... yes
checking for library containing TIFFOpen... -ltiff
checking funkyimage.h usability... no
checking funkyimage.h presence... no
checking for funkyimage.h... no
checking for library containing funkyopen... no

--------------------------------
   Checking for video options
--------------------------------
checking linux/videodev2.h usability... yes
checking linux/videodev2.h presence... yes
checking for linux/videodev2.h... yes
checking for ffmpeg... 
checking libavcodec/avcodec.h usability... yes
checking libavcodec/avcodec.h presence... yes
checking for libavcodec/avcodec.h... yes
checking libavformat/avformat.h usability... yes
checking libavformat/avformat.h presence... yes
checking for libavformat/avformat.h... yes
checking libswscale/swscale.h usability... yes
checking libswscale/swscale.h presence... yes
checking for libswscale/swscale.h... yes
checking for library containing main... none required
checking for library containing av_read_frame... -lavformat
checking for library containing avcodec_open2... -lavcodec
checking for library containing sws_getContext... -lswscale
checking awesomevid.h usability... no
checking awesomevid.h presence... no
checking for awesomevid.h... no
checking for library containing openawesome... no

---------------------------
   Configuration results
---------------------------
Options:
 jpeg png tiff v4l2 ffmpeg

Missing options:
 awesomevideo funkyimage 


CXXFLAGS=-g -O2
LDFLAGS=
LIBS=-lswscale -lavcodec -lavformat -ltiff -lpng -ljpeg 
$ █

What about automake and libtool?

Er... yes they exist.

I'm not going to cover them because I don't use them for a variety of reasons. Back when I learned autoconf, automake always generated recursive Makefiles. Those are bad for many reasons but especially if you do parallel builds with make -J 4. I had a dual processor machine back when multiple processors or cores were rare so it mattered to me more than most people. I also like GNU Make particularly, and I'm entirely happy with writing Makefiles to the point where I don't feel the need for extra automation.

Libtool was (for me) a relatively frequent and hard to debug source of build errors in other people's packages. In fairness, this may well have been due to misuse of libtool, but either way I never learned it. Libtool was especially important back in the olden days when systems were very diverse, and when static libraries were measureably more efficient than dynamic ones. These days I tend to compile my .a files with PIC (so I can blob them into a .so plugin easily), and platforms with significant differences seem to have reduced to Linux/*BSD, OSX and Cygwin and MinGW though in the latter cases it will also work the same way as Linux. So, in short I've not felt I'd gain all that much by learning it.